Arizona Granite Countertop      

Our Total Access Kitchen Cabinets Doors & Gallery

Cherry
Maple
Freemont White
Malheur
Mauka
Ranier
Summer
Cherry
Maple
F-white
Malheur
Mauka
Ranier
Summer
             
Kitchen -1
Kitchen -2
Kitchen -3
Kitchen -4
Kitchen -5
Kitchen -6
Kitchen -7
Kitchen -8

Our Total Access Bath Cabinets Construction Specifications

All doors are mounted with Blum 107° clip-on hinges, with a Blum Lifetime Warranty.

A) Depth Adjustment: Turn screw A clockwise to move the door closer to case, counter-clockwise to move the door away from case.

B) Side Adjustment: Turn screw B clockwise to increase overlay, counter-clockwise to decrease overlay.

C) Height Adjustment: Loosening screws C permits the door to be adjusted up or down. Adjust all hinges on the same door the same way in height.

Upgrade: Blum 170° clip-on hinges, with a Blum Lifetime Warranty.

Note: Do not use household cleaners on hinge parts. They will remove the protective film and may cause the hinge to corrode.

   Specifications – Plywood Case

Our premium 5/8” plywood cases are overlaid with an abrasion resistant white vinyl foil and built with a glue and dowel construction. The edges are taped with PVC applied with hot melt glue. Bottom edges of wall cabinet finished ends are taped white PVC. Cases are not available with laminate edges, unfinished wood veneer tape, or finished wood veneer tape. All cabinets have full depth adjustable shelves where indicated, and fixed shelves where indicated. Base cabinets are constructed for built-up counter tops. Toekicks are unfinished.

Cabinetry panels are all 5/8” plywood with dowel joinery. Beech hardwood dowels are used for each connection to assure the highest structural integrity. Our assembly process includes wood glue in each dowel hole or dado and then each cabinet is machine pressed to assure squareness and tight joints at all connections.

Cabinet backs and drawer bottoms are 1/8" thick plywood that is laminated on one side with vinyl to provide a water resistant and highly wear resistant durable surface. Cabinet backs are secured to the cabinet by the use of dados on all four sides. The four-sided interlocking backs assure absolute squareness of each and every cabinet. Drawer bottoms also assure that each drawer is square when attached to the drawer box with resin-coated staples.

Drawer fronts, sides, and backs are 5/8” plywood that is laminated on two sides with vinyl. The edges visible after complete installation are laminated with PVC edgebanding. This very clean all white vinyl laminated drawer has proven to be especially suited for kitchen use.

Our hardware features a lifetime "If it breaks, it's replaced - no questions asked" manufacturers guaranty. Hinges open 107 degrees and feature 6-way adjustment. Drawer hardware features 100-pound load capacity with 3/4 extension. Hinge and drawer hardware upgrades are specified on page 12.

Due to different materials being used in the manufacture of the cabinet case, its doors, drawer fronts and accessory parts, the appearance of exposed white surfaces may not be exactly the same. The parts may appear to have various minor color differences, which may be intensified due to the shading and natural and artificial lighting present in the rooms in which the cabinets are installed.

Glenview Maple Vinyl is used for parts and finished ends where specified for Fremont Maple, Malheur, and Sumner door styles. Glenview Maple Vinyl is considered a close, but not exact match to Fremont Maple, Malheur and Sumner. Please refer to samples prior to ordering.

Warm Cherry Vinyl is used for parts and finished ends where specified for Fremont Cherry and Mauka door styles. Warm Cherry Vinyl is considered a close, but not exact match to Fremont Cherry and Mauka. Please refer to samples prior to ordering.

   Specifications – Particleboard Case

Our most affordable cabinet cases are built of textured white melamine overlaid 5/8” industrial grade particleboard with a glue and dowel construction. The edges are taped with PVC applied with hot melt glue. Bottom edges of wall cabinet finished ends are taped white PVC. Cases are not available with laminate edges, unfinished wood veneer tape, or finished wood veneer tape. All cabinets have full depth adjustable shelves where indicated, and fixed shelves where indicated. Base cabinets are constructed for built-up counter tops. Toekicks are integral and unfinished.

Cabinetry panels are all 5/8” industrial grade particleboard with dowel joinery. Beech hardwood dowels are used for each connection to assure the highest structural integrity. Our assembly process includes wood glue in each dowel hole or dado and then each cabinet is machine pressed to assure squareness and tight joints at all connections.

Cabinet backs and drawer bottoms are 1/4" thick medium density fiberboard that is laminated on one side with melamine to provide a water resistant and highly wear resistant durable surface. Cabinet backs are secured to the cabinet by the use of dados on all four sides. The four-sided interlocking backs assure absolute squareness of each and every cabinet. Drawer bottoms also assure that each drawer is square when attached to the drawer box with resin-coated staples.

Drawer fronts, sides, and backs are 5/8” industrial grade particleboard that is laminated on two sides with melamine. The edges visible after complete installation are laminated with PVC edgebanding. This very clean all white melamine laminated drawer has proven to be especially suited for kitchen use.

Our hardware features a lifetime "If it breaks, it's replaced - no questions asked" manufacturers guaranty. Hinges open 107 degrees and feature 6-way adjustment. Drawer hardware features 100-pound load capacity with 3/4 extension. Hinge and drawer hardware upgrades are specified on page 12.

Due to different materials being used in the manufacture of the cabinet case, its doors, drawer fronts and accessory parts, the appearance of exposed white surfaces may not be exactly the same. The parts may appear to have various minor color differences, which may be intensified due to the shading and natural and artificial lighting present in the rooms in which the cabinets are installed.

Hard Rock Maple Melamine is used for parts and finished ends where specified for Fremont Maple, Malheur, and Sumner door styles. Hard Rock Maple Melamine is an exact match to Fremont Maple, and is considered a close match to Malheur and Sumner. Please refer to samples prior to ordering.

Ashburn Cherry Melamine is used for parts and finished ends where specified for Fremont Cherry and Mauka door styles. Ashburn Cherry Melamine is an exact match to Fremont Cherry and is considered a close match to Mauka. Please refer to samples prior to ordering.

 

1531 N ALMA SCHOOL ROAD MESA ARIZONA 85201